Modify Selection
- Mine locations, excavations, and structures:
- Pillars
- or
- Yield pillars
- or
- Barrier pillars
- or
- Chain pillars
- or
- Web pillars
Home Links
Results 41 - 50 of 52
-
7/1/1997 - Technology NewsThe analysis of Retreat Mining Pillar Stability (ARMPS) computer program was developed in 1995 and has been widely accepted by the mining community. A Windows version of ARMPS is now available. It features simplified data input, graphics, and an expande...
-
1/1/1997 - Conference papersRock masses in deep-level mines are subject to high stresses, which can result in unexpected failure of rock into mined-out openings. Personnel from two research centers of the former U.S. Bureau of Mines, Spokane and Twin Cities, investigated a rock b...
-
2/1/1995 - Technology NewsThe objective of this work is to develop a comprehensive, practical method for designing longwall gate entries that considers coal pillar size, mine roof quality, and artificial support in an easy-to-use computer program.
-
1/1/1995 - Reports of InvestigationsDisplacement and stress changes in cemented backfill and ore pillars at the Buick Mine, near Boss, MO, were monitored by engineers from the U.S. Bureau of Mines and The Doe Run Co., St Louis, MO. Objectives of this research were to evaluate the effect ...
-
1/1/1995 - Reports of InvestigationsThis U.S. Bureau of Mines study examined spontaneous heating episodes in coal mine pillars in an active underground coal mine. The objective of this study was to discover if the location of future events of pillar spontaneous heating could be inferred ...
-
1/1/1994 - NIOSH/USBM numbered publicationsA computer program called Analysis of Retreat Mining Pillar Stability (ARMPS) is field tested and refined in order to estimate abutment pressures developed during pillaring. It can be successfully employed to predict pillar line stability.
-
1/1/1993 - Reports of InvestigationsThis report investigates the removal of gate road chain pillars in conjunction with longwall retreat mining. The objective was to determine how the pillars, supplemental support, and entries were affected by the longwall abutment pressure.
-
1/1/1993 - Reports of InvestigationsIn situ stresses are important input data for the design of safe, stable stope layouts and extraction sequences. In situ stresses were measured at the Homestake Mine, Lead, SD, using overcoring on hollow inclusion cells and borehole deformation gauges.
-
1/1/1992 - Information CircularsReviews the mechanics of rib failure and the relationship of coal mine geology and pillar constraint to rib instability. Strategies for choosing an effective method of rib support are considered and various rib support methods are discussed.
-
1/1/1992 - Reports of InvestigationsThis U.S. Bureau of Mines report summarizes a study of large-scale strata response to longwall mining at a western U.S. coal mine. This study utilized surface and subsurface measurements, geologic mapping, in situ stress measurements, and pressure cell...
Home Links
Content source: National Institute for Occupational Safety and Health, Mining Program